Individual Components / Build Your Own Kits

SVK 0101-FLT - "Floating Jaw Plate w/ Integrated Step / 7075"

Floating Jaw Plate
Made from 7075 Aluminum
"Integrated Step" for your 1st op / basic workholding needs
Plate dimensions (inches); 1.125 x 1.75 x 6.0
Step dimensions (inches); 0.115 deep x 0.125 wide Step resides 1.6350 +/- 0.0005 above vise ways
Anodized for lifelong protection

..

$52.00

Made in the USA.

SVK 0102-FLH - "Hollow Floating Jaw Plate w/Integrated Step / 7075"

Hollow Floating Jaw Plate. Removes securing bracket from machining field
Made from 7075 Aluminum
"Integrated Step" for your 1st op / basic workholding needs
Plate dimensions (inches); 1.125 x 1.75 x 6.0
Step dimensions (inches); 0.115 deep x 0.125 wide Step resides 1.6350 +/- 0.0005 above vise ways
Anodized for lifelong protection

..

$68.00

Made in the USA.

SVK 0103-FXM - "Fixed and Movable Jaw Plates w/ Integrated Step / 7075"

Fixed and Movable Jaw Plates
Made from 7075 Aluminum
"Integrated Step" for your 1st op / basic workholding needs
Plate dimensions (inches); 1.0 x 1.75 x 6.0
Step dimensions (inches); 0.115 deep x 0.125 wide Step resides 1.6350 +/- 0.0005 above vise ways
Anodized for lifelong protection
** Our Fixed and Movable Jaw Plates require 1" long bolts, sold seperately, available below **

..

$79.00

Made in the USA.

SVK 0201-FLT - "Floating Jaw Plate / Machinable Blank / 7075"

Floating Jaw Plate
Made from 7075 Aluminum
Blank Jaw Plate, Machinable for your part specific needs
Plate dimensions (inches); 1.0 x 1.75 x 6.0
Anodized for lifelong protection

..

$44.00

Made in the USA.

SVK 0202-FLH - "Hollow Floating Jaw Plate / Machinable / 7075"

Hollow Floating Jaw Plate. Removes securing bracket from machining field
Made from 7075 Aluminum
Blank Jaw Plate, Machinable for your part specific needs
Plate dimensions (inches); 1.0 x 1.75 x 6.0
Anodized for lifelong protection

..

$64.00

Made in the USA.

SVK 0203-FXM - "Fixed and Movable Jaw Plates / Machinable / 7075

Fixed and Movable Jaw Plates
Made from 7075 Aluminum
Blank Jaw Plates, Machinable for your part specific needs
Plate dimensions (inches); 1.0 x 1.75 x 6.0
Anodized for lifelong protection

..

$74.00

Made in the USA.

SVK 0301-FLT - "Floating Jaw Plate / Machinable / 6061

Floating Jaw Plate
Made from 6061 Aluminum
Blank Jaw Plate, Machinable for your part specific needs
Plate dimensions (inches); 1.0 x 2.0 x 6.0
Anodized for lifelong protection

..

$38.00

Made in the USA.

SVK 0302-FLH - "Hollow Floating Jaw Plate / Machinable / 6061

Hollow Floating Jaw Plate. Removes securing bracket from machining field
Made from 6061 Aluminum
Blank Jaw Plate, Machinable for your part specific needs
Plate dimensions (inches); 1.0 x 2.0 x 6.0
Anodized for lifelong protection

..

$58.00

Made in the USA.

SVK 0303-FXM - "Fixed and Movable Jaw Plates / Machinable / 6061"

Fixed and Movable Jaw Plates
Made from 6061 Aluminum
Blank Jaw Plate, Machinable for your part specific needs
Plate dimensions (inches); 1.0 x 2.0 x 6.0
Anodized for lifelong protection

..

$72.00

Made in the USA.

SVK 0740-BOLT - "Jaw Plate Bolts"

Jaw Plate Bolts; ½-13 x 1” SHCS

..

$8.90

Made in the USA.

SVK 0700-BRKT - "Securing Bracket"

Securing Bracket REQUIRED when using more than one Floating Jaw Plate.
Securing Bracket forces Floating Jaw Plates securely against the ways of the vise thus maintaining reatable "Z" location.
Set screw included
Anodized for life long protection.

..

$58.00

Made in the USA.

SVK 0757-SHFT - "Shaft / 5.7 inches long"

Shaft 5.7 inches long.
Length sufficient to reach and secure 1 Floating Jaw Plate / holding up to 4 parts .
Made from high grade Stainless Steel for strength and uninterupted corrosion resistance.

..

$32.00

Made in the USA.

SVK 0770-SHFT - "Shaft / 7.0 inches long"

Shaft 7.0 inches long.
Length sufficient to reach and secure up to 4 Floating Jaw Plates / holding up to 10 parts no greater than 0.80 inches Max Part Size.
Made from high grade Stainless Steel for strength and uninterupted corrosion resistance.

..

$32.00

Made in the USA.

SVK 0702-SPCR - "Carving Spacers"

Create the space needed between Jaw Plates to carve the pockets that match your parts
1/8" Thick
Sold in set of 5
1 set great for small parts
Your job may require multiple sets

..

$32.00

Made in the USA.